Cream Come True SPF 100 W/O Mineral Sunscreen
Formula Number: JZ11-161B
This water-in-oil sunscreen delivers SPF 100 performance without using organic UV filters. It contains HallBrite® EZ-FLO TDX Plus, which contains two key ingredients for maximum photoprotection formulation impact:
- SolaStay® S1 (Ethylhexyl Methoxycrylene) mitigates the photocatalytic and reactive oxygen species-generating activities of the oxide
- HallBrite® BHB (Butyloctyl Salicylate) aids wetting and dispersion of the titanium dioxide and contributes to enhanced product feel
This formula was subjected to in vitro analysis and delivered SPF ~107, PFA (PPD) ~27, performance with critical wavelength 377nm.
| Phase | INCI Name [INN/USAN] (Other Information) | Trade Name | % Wt | Function |
|---|---|---|---|---|
| A | Ethylhexyl Palmitate | HALLSTAR® OP | 7.00 | Multifunctional Emollient |
| Cyclopentasiloxane, Disteardimonium Hectorite, Propylene Carbonate | 2.00 | Viscosity Increasing Agent (Nonaqueous) | ||
| Cetyl PEG/PPG-10/1 Dimethicone | 2.00 | Emulsifier | ||
| Dimethicone (5 cSt) | 5.00 | Feel Modification / Enhancement | ||
| Acrylates/Dimethicone Copolymer | 0.80 | Film Former | ||
| Cetyl Dimethicone | 1.00 | Skin Conditioning Agent | ||
| B | Butyloctyl Salicylate, Titanium Dioxide (nano) [Titanium Dioxide] (23%), C12-15 Alkyl Benzoate, Ethylhexyl Methoxycrylene, Triceteareth-4 Phosphate, Dimethicone Crosspolymer, Silica | HALLBRITE® EZ-FLO TDX PLUS* | 17.00 | UV Filter/Sunscreen Agent / Photostabilizer / Carrier System |
| Zinc Oxide [Zinc Oxide], Triethoxycaprylylsilane (20-30 nm primary particle size) | 22.00 | UV Filter / Sunscreen Agent | ||
| C | Vinyl Dimethicone/Methicone Silsesquioxane Crosspolymer | 1.00 | Skin Conditioning Agent | |
| Beeswax (Cera Alba) | 0.25 | Thickener (Nonaqueous) | ||
| Styrene/Acrylates Copolymer (hollow spherical, 325 nm) | 4.00 | SPF Booster | ||
| D | Water (Aqua) | up to 100 | Volatile Carrier | |
| Glycerin | 8.00 | Humectant | ||
| Disodium EDTA | 0.05 | Chelating Agent | ||
| Sodium Chloride | 0.80 | Emulsion Stabilizer | ||
| E | Preservative | a.n. | Preservative |
PREPARATIVE PROCEDURE
| 1 | To the main Vessel, add phase A and start mixing, add phase B, and heat to 80°C. |
| 2 | Add phase C into AB, and mix well until uniform. |
| 3 | To a secondary vessel add liquids of phase D, start mixing, add Disodium EDTA, then add Xanthan Gum and heat this phase to 80°C. |
| 4 | When both phases are homogenous at their designated temperature, Start homogenizing phase ABC. |
| 5 | Very slowly add phase D to phase ABC. |
| 6 | Start to cool to room temperature. When less than 50°C, add phase E into phase ABCD. |
PRODUCT CHARACTERISTICS (25°C)
| Appearance | Off-white Cream |
| Viscosity (20 rpm, Brk, RVII, SP 4, after 24h at room temperature; mPa∙s): | 25000 - 40000 |
*Patented and Patent Pending
The information presented herein is believed to be accurate and reliable, but no warranty or guarantee, expressed or implied, is made regarding the information or the performance of any product. Further, nothing contained herein shall be taken as any inducement or recommendation to use, manufacture or sell that may infringe any patents or any other proprietary rights now or hereafter in existence, nor to imply compliance with any regulatory requirements
The Hallstar Company - 120 South Riverside Plaza Suite 1620 - Chicago, IL 60606-3911 USA
Tel.: 877 427 4255 (International n.: +1 312 385 4494) - Fax: +1 330 929 3616 - E-mail: customerservice@hallstar.com Web Site: hallstar.com