Endless Emotion rejuvenates your skin without any hassle. Its unique blend of active ingredients and nourishing olive derivatives battle new wrinkles before they can form, smooth out fine lines, and significantly improve the general appearance and texture of your skin. As a day cream, apply on the face and wait until the cream has been fully absorbed. As a second skin mask, apply generously and afterwards apply an aqueous 5% Calcium Chloride solution for a face mask result.
| Phase | INCI Name [INN/USAN] (Other Information) | Trade Name | % Wt | Function |
|---|---|---|---|---|
| A | Water (Aqua) (deionized) | up to 100 | Volatile Carrier | |
| Disodium EDTA | 0.05 | Chelating Agent | ||
| B | Algin | 1.50 | Thickener (Aqueous) | |
| Sclerotium Gum | 0.30 | Thickener (Aqueous) | ||
| Xanthan Gum (standard grade) | 0.20 | Thickener (Aqueous) | ||
| Glycerin | 4.00 | Humectant | ||
| C | Cetearyl Olivate, Sorbitan Olivate | Olivem® 1000 | 3.00 | Self-Emulsifier / Liquid Crystal Maker |
| Ethylhexyl Olivate | Sensolene® | 2.00 | Multifunctional Emollient | |
| Sclerocarya Bierra Seed Oil | Biochemica® Marula Oil Virgin | 4.00 | Emollient | |
| Ethylhexyl Methoxycrylene | SolaStay® S1* | 2.00 | Photostabilizer | |
| BHT | 0.50 | Antioxidant Agent | ||
| Tocopherol | Biochemica® Vitamin E Natural | 0.50 | Antioxidant Agent | |
| D | Nylon-6 | 4.00 | Texturizing Agent | |
| Synthetic Fluorphlogopite, Titanium Dioxide, Tin Oxide | 1.00 | Pigment | ||
| E | Tocopherol | 1.00 | Active Ingredient | |
| Olea Europaea (Olive) Leaf Extract, Water | Eurol® BT | 0.30 | Multifunctional Active Ingredient | |
| F | Retinyl Palmitate, Helianthus Annuus (Sunflower) Seed Oil | 0.40 | Active Ingredient | |
| G | Preservative | a.n. | Preservative |
PREPARATIVE PROCEDURE
| 1 | In the main vessel weigh phase B ingredients, dispersing the thickeners in the glycerin. |
| 2 | Add phase A to phase B and warm it to 75-80°C with mixing, homogenizing as necessary. |
| 3 | Prepare phase C and warm it to 75-80°C. |
| 4 | Add phase C to phase AB and homogenize using a suitable dispersion unit (e.g., Silverson or Ultra-Turrax®). |
| 5 | Cool to room temperature under gentle stirring. |
| 6 | One by one add phases D, E, F and G and homogenize using a suitable dispersion unit (e.g., Silverson or Ultra-Turrax®). |
PRODUCT CHARACTERISTICS (25°C)
| Appearance | Yellowish and shiny fluid emulsion |
| Viscosity (Brk, RVDV, T-B, 10 rpm, after 24 h at room temperature; mPa·s) | 8,000 - 12,000 |
| pH | 5.0 - 6.0 |
*Patented and Patent Pending
The information presented herein is believed to be accurate and reliable, but no warranty or guarantee, expressed or implied, is made regarding the information or the performance of any product. Further, nothing contained herein shall be taken as any inducement or recommendation to use, manufacture or sell that may infringe any patents or any other proprietary rights now or hereafter in existence, nor to imply compliance with any regulatory requirements
The Hallstar Company - 120 South Riverside Plaza Suite 1620 - Chicago, IL 60606-3911 USA hallstarbeauty.com